Theses/Dissertations from 2013
Inventory Pinch Algorithms for Gasoline Blend Planning, Pedro A. Castillo Castillo
WAX-BASED EMULSIFIERS FOR WAX EMULSIONS FOR USE IN ENGINEERED WOOD PRODUCTS, Nels Grauman Neander
Extended Ocular Drug Delivery using Hyaluronic Acid-Containing Model Silicone Hydrogel Materials, Myrtidiotissa Korogiannaki
Galactose Modified Polyvinylamine, a New Class of Water Soluble Polymers, Hajir Mokhtari
Analytical and Biomedical Applications of Porous Membranes, Si Pan
A Poly-N-isopropylacrylamide Based Hydrogel as a Novel Material for Vitreous Replacement, Robyn Perry
MEMBRANE AND TEMPERATURE BASED METHODS FOR PROCESSING AND PURIFYING MONOCLONAL ANTIBODIES, Rahul Hemant Sadavarte
Global Optimization of Dynamic Process Systems using Complete Search Methods, Ali Mohammad Sahlodin
Highly Shear-Thinning Mucoadhesive Hydrogels for Ophthalmic Applications, Paniz Sheikholeslami
Theses/Dissertations from 2012
Modelling and Control of Batch Processes, Siam Aumi
ANAEROBIC DIGESTION OF MICROALGAE: MODELING AND IDENTIFICATION FOR OPTIMIZATION AND CONTROL, Elliot T. Cameron
BIOCOMPOSITES REINFORCED WITH CELLULOSE NANOCRYSTALS DERIVED FROM POTATO PEEL WASTE, Dan Chen
Dynamic Optimization Formulations for Plant Operation under Partial Shutdown Conditions, Zhiwen Chong
FAULT DIAGNOSIS AND FAULT-TOLERANT CONTROL OF CHEMICAL PROCESS SYSTEMS, Miao Du
STUDY OF REACTIONS BETWEEN HIGHLY FUNCTIONALIZED LOW MOLECULAR WEIGHT POLYETHYLENE AND POLYAMINES TO PRODUCE THERMOSET MATERIALS, Tayyab Hameed
Improving Process Efficiency Through Applied Process Scheduling and Production Planning Optimization, Matthew J. Hazaras
Synthesis and switchability study of amidine-containing vinyl monomers and their polymers, Meng Li
Mechanisms for Cellulose-reactive Polyvinylamine-graft-TEMPO Adhesive, Jieyi Liu
MATERIAL DESIGN AND INTERFACIAL ENGINEERING FOR HIGH-PERFORMANCE ORGANIC THIN FILM TRANSISTORS, Ping Liu
Interfacial Synthesis of Metal-organic Frameworks, Hongyu Lu
Optimization-based Formulations for Operability Analysis and Control of Process Supply Chains, Richard Mastragostino
Dendrimer Crosslinked Collagen Gels Modified with Extracellular Matrix Components, Marta A. Princz
WAX-BASED EMULSIFIERS FOR USE IN EMULSIONS TO IMPART WATER REPELLENCY TO GYPSUM WALLBOARDS, Mark T. Rattle
REGULARIZED LATENT VARIABLE METHODS IN THE PRESENCE OF STRUCTURED NOISE AND THEIR APPLICATION IN THE ANALYSIS OF ELECTROENCEPHALOGRAM DATA, Siamak Salari Sharif
Molecular Dynamics Simulations of Liquid Transport through Nanofiltration Membranes, Luying Wang
MICROGEL BASED ADHESIVES FOR WET PAPER STRENGTH, QUAN WEN
STUDY OF CRYSTAL MORPHOLOGIES OF HYDROGENATED CASTOR OIL AS A RHEOLOGY MODIFIER, Dingzheng Yang
NANOPARTICLE FLOTATION COLLECTORS, Songtao Yang
Theses/Dissertations from 2011
Design for Dynamic Performance: Application to an Air Separation Unit, Yanan Cao
Study of Liquid-Liquid Dispersion of High Viscosity Fluids in SMX Static Mixer in the Laminar Regime, Mainak Das
INKJET PRINTED CONDUCTIVE INKS FOR THE FABRICATION OF ORGANIC THIN FILM TRANSISTORS, Jason Doggart
ENGINEERING POLYMER SURFACE CHEMISTRY AND TOPOGRAPHY VIA ADDITIVE MIGRATION AND PHYSICAL SECTIONING, Hongyan Gu
THE EFFECT OF MATERIAL PROPERTY AND OPEN TIME ON THE PERFORMANCE OF COMMERCIAL HOT-MELT ADHESIVES, Giang Le
Development of Paper-based Devices for Diagnostics and Biosensing, Vincent Leung
Drug Delivery to the Posterior Eye Using Etched Microneedles, Geetha Mahadevan
Studies of inorganic nanoparticles as collectors for flotation, Behnam Naderizand
Latent Variable Methods: Case Studies in the Food Industry, Emily Nichols
Influence of Additives on the Foamability of Potato Starch based Biopolymers, Hiteshkumar G. Oza
Energy Efficient Model Predictive Building Temperature Control, Matt Wallace
A Generic Smell Generating Enzymatic Biosensor, Yaqin Xu
CONTROLLABLE SELF-ASSEMBLY BASED ON INTERACTION OF BORONIC ACIDS AND DIOLS, Dan Zhang
Theses/Dissertations from 2010
Immune Response to Synthesized Pnipam-Based Graft Hydrogels Containing Chitosan and Hyaluronic Acid, Mariam D. Al-Haydari
Integrated Plant Modeling and Optimization Under Uncertainty, David Gerardi
Particle Movement in Paper Porous Media: Influence Factors and Model, Huan Hsuan Hsu
Thermally Induced Wrinkling Behaviour of Automotive Decorative Films, Mahdy Mazhary Malayery
The Use of Polyvinylamine-supported TEMPO Oxidation in Wet-strengthening of Paper, Pengchao Ren
Dual Modifier Adaptation Methodology For the On-line Optimization of Uncertain Processes, Eric Rodger
Injectable In Situ Gellable Hydrogel-Microgel Composites For Drug Delivery, Daryl N. Sivakumaran
Processing and Properties of Biodegradable Polymer Blends Based on Gelatinized Potato Starch, Salma Falah Toosi
REACTIVE EXTRUSION OF PHOSPHATE CROSSLINKED POTATO STARCH, Gang Wang
Studies of Labile polyelectrolyte at solid-liquid interfaces, Liang Zhang
Theses/Dissertations from 2009
Heat Exchanger Network Design, Monitoring and Optimization, Uma Maheshwar Kiran Ati
Development of Photonic Integrated Microchip-Based, Thomas M. Kowpak
Environment-Responsive Paper-supported Membrane for Chromatographic Bio-separations: Preparation, Characterization and Application, Kor-Zheng Mah
NONLINEAR MODEL PREDICTIVE CONTROL DESIGN AND APPLICATIONS, Maaz Mahmood
A FRAMEWORK FOR INTEGRATED REACTIVE SCHEDULING OF PLANT OPERATIONS AND MAINTENANCE, Ravi Pula
A Novel Approach for the Coordination of Block Decentralized Model Predictive Control, Alberto Jorge Olvera Salazar
The influence of paper surface chemistry on the activity of immobilized antibodies, Jingyun Wang
Use of Supercritical Carbon Dioxide in the Processing of Thermoplastic Elastomer Nanocomposites, Zijin Zhuang
Theses/Dissertations from 2008
MILP Formulations for Optimal Steady-State Buffer Levels and Flexible Maintenance Scheduling, Kristin M. Davies
Engineering of Hyperbranched Polyethylene and its Future Applications, Mohammad Haj-Abed
Theses/Dissertations from 2006
Monitoring, Diagnosing and Enhancing the Performance of Linear Closed-Loop Real-Time Optimization Systems, Danielle Zyngier
Theses/Dissertations from 2004
Synthesis and Characterization of Polyethylenes by Nickeldiimine and Metallocene Catalysts, Fahad AIObaidi
BATCH PROCESS IMPROVEMENT USING LATENT VARIABLE METHODS, SALVADOR GARCIA Munoz
SYNTHESIS, CHARACTERIZATION AND PROPERTIES OF NOVEL POLYOLEFINS BY SINGLE-SITE CATALYSTS, ZHIBIN YE
THE INTERACTIONS OF PRESSURE SENSITIVE ADHESIVE WITH PAPER SURFACES, BOXIN ZHAO
Theses/Dissertations from 2003
Quality Control for Batch Processes Using Multivariate Latent Variable Methods, Jesus Flores-Cerrillo
Mechanisms of Filler Flocculation with PEO/Cofactor Dual-component Flocculants, Chen Lu
Development of Vision-Based Inferential Sensors for Process Monitoring and Control, Honglu Yu
Theses/Dissertations from 2002
Protein Adsorption to Polyethylene Oxide-Grafter Surfaces, Jacques Gérard Archambault
Multivariate Image Analysis and Regression for Industrial Process Monitoring and Product Quality Control, Manish H. Bharati
PEO/Poly(Vinyl Phenol-Co-Styrene Sulfonate) Aqueous Complex Formation, Rongjuan Cong
Mathematical Modeling of the Pressure- Driven Performance of McMaster Porefilled Membranes, Jesus Garcia-Aleman
Synthesis, Characterization, Thermomechanical and Rheological Properties of Long Chain Branched Metallocene Polyolefins, Edward B. Kolodka
The Treatment Of Missing Measurements In PCA And PLS Models, Philip R. C. Nelson
Theses/Dissertations from 2001
PEO and PEO-heparin modified surfaces for blood contacting applications, Ying Jun DU
Control relevant model identification with prior knowledge, Ali Esmaili
Free Radical Polymerization of N-Vinylformamide and Novel Comb-structure Polyelectrolytes, Leming Gu
Gas flows and mixing in models of the Inco flash smelting furnace, Loris Molino
Atom Transfer Radical Polymerization and Its Continuous Processes, Youqing Shen
Subspace identification methods for process dynamic modeling, Ruijie Shi
Using external information for statistical process control, Seongkyu Yoon
SYNTHESIS OF CATIONIC MACROMONOMERS BY LIAVING POLYMERIZATIONS FOR COMB-BRANCHED POLYELECTROLYTES, Faquan Zeng
Theses/Dissertations from 2000
Improvement of processes and product quality through multivariate data analysis, Carl Duchesne
The effects of air cooling on the film blowing process, Vasileios Sidiropoulos
The effect of polymer structure and interaction on paper strength, Jin Zhang
Theses/Dissertations from 1999
Product Quality Control in Reduced Dimension Spaces, Tracy Lee Clarke-Pringle
Polymer melt formation and densification in rotational molding, Marianna Kontopoulou
Three-dimensional finite element analysis of viscoelastic flow, Farhad Sharif
Theses/Dissertations from 1998
Finite Element Simulation of Flow in Twin Screw Extruder Mixing Elements, Victor Bravo
Product and Process Improvement Using Latent Variable Methods, Christiane M. Jaeckle
Experimental Studies of Static Mixers and Twin Screw Extruders, Shaffiq A. Jaffer
Transient simulation of non-Newtonian coextrusion flows in complex geometrics, Alberto Rincon
Measurement and Modelling of Long Chain Branching, Sydney Thomas
Development of an Effective Model for Particle Size Distribution in Suspension Copolymerization of Styrene/Divinylbenzene, Eduardo Vivaldo-Lima
Poly(N-isopropylacrylamide) at the air/water interface, Ju Zhang
Theses/Dissertations from 1997
Mechanisms of pulp loss in flotation deinking, Michael Ajersch
Polymer sintering and its role in rotational molding, Céline T. Bellehumeur