Theses/Dissertations from 2012
Near-surface Microstructure of Cast Aluminum and Magnesium Alloys, Morteza Amoorezaei
Advanced Electrode Materials for Electrochemical Supercapacitors, Deepak Kumarappa Ariyanayagam
GALVANNEALING OF DUAL PHASE STEELS, Hamed Asgari Moslehabadi
KINETIC STUDY OF DROPLET, Elaine Chen
NUMERICAL AND EXPERIMENTAL STUDY OF MARANGONI FLOW ON SLAG-LINE DISSOLUTION OF REFRACTORY, Yi Chen
DYE-SENSITIZED SOLAR CELLS WITH A SOLID HOLE CONDUCTOR, LULU DENG
CARBON NANOTUBE/GRAPHENE COMPOSITE SEMICONDUCTORS FOR HIGH PERFORMANCE POLYTHIOPHENE ORGANIC THIN FILM TRANSISTORS, Cameron E. Derry
POLYMERIZATION KINETICS OF THERMOSETS WITH AN EPOXIDE-FUNCTIONALIZED POLYHEDRAL OLIGOMERIC SILSESQUIOXANE, Joseph Khouri
ANELASTIC BEHAVIOR AND DIFFRACTION MODELING OF SILICON CARBIDE WHISKER REINFORCED ALUMINA, Juan Kong
Origins of Strength and Ductility in Mg-RE Binary Alloys, Kevin R. Noble
NANOMATERIALS: FROM INTERFACIAL CHARACTERISTICS TO DEVICE APPLICATIONS, Kewei Wang
Characterization of Extended Defects in Heteroepitaxy of GaSb/Si Thin Films with Conventional Transmission Electron Microscopy, Steffi Y. Woo
Carbon Injection into Electric Arc Furnace Slags, Taixi Zhu Mr.
Theses/Dissertations from 2011
Magnetic Characterization of Electrodeposited Nanocrystalline Ni and Ni-Fe alloys, Sahar Arabi Ms.
The Electrophoretic Deposition of Conjugated Polymer Functionalized Carbon Nanotubes for Photovoltaic Applications, Travis V. Casagrande B.Eng.Mgt., M.A.Sc.
Functionally Graded Martensitic Stainless Steel Obtained Through Partial Decarburization, Sean M. Crawford
Localized Corrosion Behaviour of Cu-lean AA 7003 Extrusions, charanya krishnan
Modelling of Recovery and Recrystallization in Magnesium Alloys, Pawel Okrutny
STRUCTURE, COMPOSITION AND PERFORMANCE OF SURFACE FILMS ON AZ ALLOYS AS A FUNCTION OF pH AND ALLOYED ALUMINUM CONCENTRATION, Ryan C. Phillips
Decarburization Kinetics of Fe-C-S Droplets in Oxygen Steelmaking Slags, Michael D. Pomeroy
Cyclic Fatigue Behaviour of Wrought AZ80 Magnesium Alloy from Forged Automotive Wheel, Geoffrey Rivers
A MOLECULAR DYNAMICS STUDY OF AUSTENITE-FERRITE INTERFACE MOBILITY IN PURE IRON, Huajing Song Mr.
Theses/Dissertations from 2010
SCALING ANALYSIS OF MELTING KINETICS IN RANDOMLY PACKED STEEL SCRAP IN ELECTRIC ARC FURNACE STEEL MAKING, Hande Akseki
Characterization of Biomaterial-Bone Interfaces with Transmission Electron Microscopy, Kathryn Grandfield
Latent Hardening in Pure Magnesium Single Crystals, Fumiaki Hiura
Plastic Deformation and Fracture Behavior of AI-Mg and AI-Cr Alloys, Mike Jobba
Solidification of Hot-Dip Galvanized Coatings, Shirin Kaboli
Advanced materials and electrochemical fabrication methods for application in biosensors, Yingying Li
Nanocomposite Coatings for Biomedical Applications, Rong Ma
Polypyrrole and Composite Electrodes for Electrochemical S upercapacitors, Chao Shi
ADVANCED MATERIALS AND FABRICATION METHODS FOR ORGANIC SOLAR CELLS, Kangmin Wu
The Effect of Carbon Content on the Mechanical Properties and Microstructural Evolution of Fe-22Mn-C TWIP / TRIP Steels, Eileen Eva Yang
A MD STUDY OF Sn AND ITS CRYSTAL - MELT INTERFACE PROPERTIES, Shaon Yasmin
Extra Current Uncovered in Alkaline Biofuel Cells, Cindy Xinxin Zhao
Theses/Dissertations from 2009
THE DEPOSTION OF SINTERED NICKEL PLAQUE WITIllN A NICKEL FOAM SUBSTRATE, Dan Bielby
Microstructural Stability of Magnesium Alloys during High Temperature Deformation, Zhan Gao
Nanocomposite electrodes for electrochemical supercapacitors, Gideon Moses Jacob
ADVANCED MATERIALS AND METHODS FOR THE FABRICATION OF ELECTROCHEMICAL SUPERCAPACITORS, Jun Li
Precipitation of Intermetallic Phases from Rapidly Solidifying Aluminum Alloys, Damon Panahi
Atomistic Simulations for computing solid liquid interface properties of the Al-Mg system, Jahidur Rahman
TRANSIENT BEHAVIOUR IN GLUCOSE/OXYGEN BIOFUEL CELLS, Han Yan
THE EFFECT OF MICROSTRUCTURE ON THE STRAIN LOCALIZATION IN COARSEGRAINED AA5754 SHEETS, Guozhen Zhu
Theses/Dissertations from 2007
Formability and Failure of Automotive Sheet Material AA5754, Diana Zdravecky
Theses/Dissertations from 2004
Tensile creep of silicon carbide whisker-reinforced alumina composites, Guang-Chun Quan
Theses/Dissertations from 2003
Thermodynamics of polymerization, dielectric properties, and a new orientational glass, Jingson Wang
Theses/Dissertations from 2002
Damage in heterogeneous aluminum alloys, Justin J. Gammage
Semiconducting and dielectric properties of barium titanates, tantalates and niobates with perovskite structure, Taras Kolodiazhnyi
Theses/Dissertations from 2001
Cold work embrittlement of interstitial-free sheet steel, Kevin P. Boyle
A study of fracture in brittle laminar composites that contain weak interlayers, Colin Scott
Co-deformation of a two-phase FCC/BCC material, Chad W. Sinclair
Theses/Dissertations from 2000
Evaluation of Yttrium-Doped SrTiO₃ as a Solid Oxide Fuel Cell Anode, Shiqiang Hui
Strain relaxation in indium gallium arsenide phosphide films on indium phosphide substrates, Xiaohua Wu
Theses/Dissertations from 1999
Active-passive corrosion of iron-chromium-nickel alloys in hot concentrated sulphuric acid solutions, Joseph R. Kish
Study of Nickeliferrous Laterite Reduction, Shoubao Li
Separation of components in waste oxides by evaporation and condensation under reduced pressure, Ahad Zabett
Theses/Dissertations from 1998
Room temperature indentation of molybdenum disilicide, Paul Boldt
The effect of mesoscopic spatial heterogeneity on the plastic deformation of Al-Cu alloys, Kelly T. Conlon
Influence of Dynamic Behaviour of Materials, Haron Ogega Gekonde
The role of galvanic coupling effect in determining crevice corrosion morphology, Huizhong Fred Hua
High-resolution analytical electron microscopy and creep deformation of silicon nitride ceramics, Qiang Jin
Damage in MMCs and its role in microstructural design, Denis J.G. Lahaie
Diffusion studies in InGaAs/GaAs and AlGaAs/GaAs quantum well structures, Kartik Ramanujachar
Ionic stability of oxide particles in polar organic media, Gonghou Wang
Molecular dynamics and reaction kinetics during polymerization using dielectric spectroscopy and calorimetry, Dwayne Andrew Wasylyshyn
Theses/Dissertations from 1997
Diffusion-induced liquid film migration in the aluminum-copper system, Simon William Barker
Characterization and modeling of strained layers grown on V-grooved substrates, Archana Gupta
Processing and creep behaviour of silicon carbide-platelet reinforced alumina, Rosaura Ham-Su
Electrochemical measurements and thermodynamic properties of alkali fullerides, Joon Hong Kim
Dielectric and Ultrasonic Studies of Macromolecular Growth During Polymerization, Matthew Giles Parthun
A Study of Kinetics and Mechanisms of Iron Ore Reduction in Ore/Coal Composites, Stanley Shuye Sun
Theses/Dissertations from 1996
X-RAY ABSORPTION FINE STRUCTURE SPECTROSCOPY OF THIN FILM SiGe ALLOYS, Jeff Aubry
Optoelectronic Properties of Poly(p-phenylene vinylene) For Application in Light Emitting Devices, Mohammad Esteghamatian
Study of the mechanical properties of magnesium-8.5wt% aluminum by in-situ neutron diffraction, Michael Gharghouri
Growth Related Phenomena in MBE Films of InGaAsP on InP substrates, Tatsuya Okada
Theses/Dissertations from 1995
Nitridation and Interface Structures of Ni-Ti-N Alloys, George C. Savva
Theses/Dissertations from 1994
The Properties of Lead Titanate Thin Films produced by Chemical Vapour Deposition, Lynnette D. Madsen
High-Strength, High-Conductivity, Two-Phase Materials, Jeffrey Todd Wood
Theses/Dissertations from 1993
Defects in Silicon-Germanium Strained Epitaxial Layers, Mark Dynna
External and Internal Oxidation Properties of Ternary Fe-Si-Al, Ni-Cr-Al and Ni-Si-Al Alloys, Shiwei Guan
The Micromechanisms of Cemented Carbide Cutting Tool Wear, Shruharsha Sharadchandra Ingle
The deformation of copper-tungsten composites, Warren James Poole
An Internal Friction and DSC Study of the Cu-Zn-Al Shape Memory Alloys, Tian Xiao
Theses/Dissertations from 1992
Low strain behaviour of a particulate-reinforced aluminum alloy, Stephen Francis Joseph Corbin
Solidification Of Peritectic Alloys, M. Gillian Julien
Kinetics, mechanisms and modelling of calcium treatment of steel, Dennis Ding-Zheng Lu
Salt film development during pitting of nickel, Jingli Luo
A study of coupled interfacial reactions and diffusion in multi-component metallic/ionic systems, Duncan Dongke Ma
Modelling and measurement of unconfined bubbly two-phase plume flow, Yuanyi Sheng
The role of oxygen in hot metal desulphurization with calcium carbide powder injection, Yongfu Zhao
Theses/Dissertations from 1991
Photochemical etching of n-InP, Theodore Douglas Lowes
Ion Implantation Damage in Quartz, Richard George Macaulay-Newcombe
Growth and characterization of electrodeposited zinc sulphide and chemical vapour atomic layer deposited zinc oxide, sulphide, and oxysulphide thin films, Brian Wayne Sanders
Permeation and Thermal Desorption Studies of Deuterium Diffusion and Trapping in Ion-Implanted Nickel, San-Qiang Shi
Structural Chemistry of Lead-Antimony and Lead-Bismuth Sulphides, Aniceta Skowron
A study of α/β boundaries in a Zr-2.5 wt % Nb alloy, Wenzheng Zhang